Mode 2 EV Charging cable
Mode 2 EV Charging Cable is a type of charging method that is suitable for home and office use, also known as basic charging station, mainly used for charging electric vehicles. Compared with other charging methods, such as mode 1, mode 3, and mode 4, mode 2 EV charging cable can achieve vehicle charging without the need for professional installation and modification of facilities, and the cost is also relatively low, so it is accepted by more and more people. This EV charging cable uses a special cable with integrated shock protection against AC and DC currents. It can connect the electric vehicle to a household AC power source or other standard power outlet, and perform slow or medium speed charging. Mode 2 charging cable usually has a protective device, also known as an adapter, which can exchange charging parameters between the vehicle and the charger, ensuring the safety and efficiency of charging. Mode 2 charging cable is one of the four charging modes of electric vehicles, and it is also the main charging mode of the portable charging gun currently on the market. It has the advantages of portability, flexibility, and applicability to various occasions.
Core Advantage
High compatibility
High speed charging
Equipped Type A+6ma DC filter
Automatically Intelligent Repair
Automatically restart function
Over-temperature protection
Full link temperature control system
EV Plug
Integrated design
Long working Life
Good conductivity
Self filter the surface impurities
Silver plating design of terminals
Real-time temperature monitoring
Heat Sensor guarantee the charging safety
Box Body
LCD display
IK10 Rugged enclosure
Higher waterproof performance
IP66, rolling-resistance system
TPU Cable
Comfortable to touch
Durable and preservative
EU standard ,Halogon-free
High and cold temperature resistance
Core Advantage
High compatibility
High speed charging
Equipped Type A+6ma DC filter
Automatically Intelligent Repair
Automatically restart function
Over-temperature protection
Full link temperature control system
Box Body
LCD display
IK10 Rugged enclosure
Higher waterproof performance
IP66, rolling-resistance system
EV Plug
Integrated design
Long working Life
Good conductivity
Self filter the surface impurities
Silver plating design of terminals
Real-time temperature monitoring
Heat Sensor guarantee the charging safety
TPU Cable
Comfortable to touch
Durable and preservative
EU standard ,Halogon-free
High and cold temperature resistance
steps for usage-Start
1.Plug the power plug (wall end)
into the wall socket.
2.Switch to the correct use current.
3.Insert the charging plug
(car end)into the charging
socket on the car.
4.Start charging…
Steps for usage-finish
1.Pull out the charging
plug(car end).
2.Pull out the power plug(wall end).
3.Organize and place charging equipment.
·Please select a suitable chargingcurrent in the charging gun,thecurrent cannot be switched duringthe charging process.
The portable electric car charger is designed as a LEVEL 2 AC charger, with charging power ranging from 3.6kW to 22kW. To ensure user safety and prevent potential hazards, it is imperative to thoroughly review the equipment manual before usage. Charging should only take place in locations that meet the specified charging conditions, and users must verify that the power supply and wiring are in a normal and functioning state prior to initiating charging.
01
Avoid submerging the device in water.
Refrain from using the charger in environments that exceed the recommended operating temperature.
02
Exercise caution and avoid inserting fingers into the car end plug when the device is connected to a power source.
Cease usage immediately if any damage is detected in the equipment or cables.
03
Strictly use the device for charging electric vehicles only.
When utilizing the adapter (10A to 16A), it is strictly prohibited to adjust the charging device to 16A mode to prevent safety hazards.
04
The precautions for use extend beyond those listed above.
If uncertain about potential safety hazards, promptly contact after-sales service for assistance.
01
High Quality
Integrated factory strength to support all kinds of tape customization,with paper base,cloth base,glue,coating all raw material production capacity
02
Advanced Equipment
Integrated factory strength to support all kinds of tape customization,with paper base,cloth base,glue,coating all raw material production capacity
Hot Tags: mode 2 charging cable, China mode 2 charging cable manufacturers, suppliers, factory, ccs 2 connector, Type 2 Charging Connector, Type 1 EV Connector, Type 1 Ev Charging Socket, type 2 connector, EV Charging Switchgears
