Jiaxing Apeks Imp. & Exp. CO., Ltd

Ev Charger Type 1 To Type 2

Ev Charger Type 1 To Type 2

EV charger Type 1 to Type 2 is a charging adapter that connects charging equipment that complies with the Type 1 standard to electric vehicles with a Type 2 interface to achieve adaptive charging between different interface types.
Send Inquiry
Description
Technical Parameters
Application scenarios

Home charging: If you already have a Type 1 charger at home and the vehicle has a Type 2 interface, you can use this adapter to achieve home charging.
Public charging pile adaptation: In some public charging places, if there is only a Type 1 charging pile and the vehicle has a Type 2 interface, the vehicle can be charged normally through the adapter.
Emergency charging: When the vehicle is out of town or cannot find a Type 2 charging pile temporarily, the Type 1 to Type 2 adapter can use the existing Type 1 charging facilities for emergency charging.

ev charger type 1 to type 2
 

FAQ 

Q: Is the EV charger Type 1 to Type 2 suitable for all electric vehicles?

A: Not necessarily. You need to confirm the charging protocol and power range of the vehicle's Type 2 interface, as well as the output compatibility of the Type 1 device. Some special models or old devices may not support it.

 

Q: How fast is the charging speed using this charger?

A: The charging speed depends on the output power of the Type 1 device (commonly 2-22kW), the limitations of the vehicle's battery management system, and the grid conditions. It is usually AC slow charging, which is slower than DC fast charging.

 

Q: Can it be used in bad weather?

A: Most products have limited protection levels. Although they can handle light rain (IP54 and above), avoid using them in heavy rain, high temperature exposure or extremely cold environments to prevent the interface from getting wet or the device performance from degrading.

 

Q: What should I do if the device heats up severely during charging?

A: Slight heating is normal. If it is abnormally hot or has a peculiar smell, it may be due to poor interface contact, overload or device failure. You need to cut off the power immediately and check the connection and device status.

 

Q: Does this charger support DC fast charging?

A: Not supported. It is only used for AC charging between Type 1 and Type 2 interfaces. DC fast charging requires dedicated DC charging equipment and corresponding interfaces.

 

Hot Tags: ev charger type 1 to type 2, China ev charger type 1 to type 2 manufacturers, suppliers, factory, Type 1 To Type 2 Ev Charging Cable, EV Charging Cable, type 1 to type 2 charging cable, type 1 type 2 cable, ev cable type 1 to type 2, type 1 to type 2 ev cable