Jiaxing Apeks Imp. & Exp. CO., Ltd

Tesla Wall Connector

Tesla Wall Connector

Tesla Wall Connector is a home/commercial AC charging device that supports a maximum output power of 11.5 kW and is designed to efficiently and safely provide Level 2 fast charging for electric vehicles. The device can be installed in homes, offices, or shared parking spaces, and has excellent compatibility and intelligent management functions, making it an ideal fixed EV charging solution.
Send Inquiry
Description
Technical Parameters

Products advantage

 

  • Maximum power output: 11.5 kW (240V, single phase, 48A maximum current)
  • Typical charging efficiency: provides Tesla with approximately 44 miles of range per hour
  • Dynamic power adjustment: allows electrician to set current (from 12A to 48A) to match grid capacity
  • Multi-device intelligent power distribution: multiple Wall Connectors can automatically coordinate power distribution to maximize total current utilization

 

tesla wall connector

 

Important Usage Notes
  1. Must be installed by a professional electrician: The installation must comply with local electrical codes, and a 60A circuit breaker is recommended (supports a maximum of 48A output).
  2. Reserve charging space: The installation location should ensure that the charging cable can easily reach the charging port after the vehicle is parked (the cable length is about 7.3 meters).
  3. Ensure a good Wi-Fi signal: The device relies on Wi-Fi for remote control, monitoring and firmware updates. It is recommended to install it in an area covered by the network.
  4. Do not disassemble or modify the device without authorization: Any unauthorized changes may cause safety hazards and cause the warranty to be invalid.
  5. Avoid exposure to extreme environments: Although it has an IP55 protection level, it is still recommended to avoid direct sunlight or rain to extend its service life.
  6. Reserve capacity for the power distribution system: If you plan to install multiple Wall Connectors, please reserve the total current capacity and use the load management function.
  7. Keep the cable neat and tidy: After use, please coil and hang the charging cable to avoid tripping or cable damage.

 

 

 

 

 

 

FAQ

 

 

Can the Tesla Wall Connector be used for non-Tesla electric vehicles?
Yes, the Universal Wall Connector has a built-in J1772 connector and can charge most non-Tesla electric vehicles.

 

How can I determine if my home circuit can support the Tesla Wall Connector?
It is recommended to consult a licensed electrician to assess whether the home circuit can support the installation of a 60A circuit breaker to ensure safe operation.

 

Is the device safe to install outdoors?
Yes, the device has an IP55 protection rating and is suitable for outdoor installation, but it should be avoided as much as possible from long-term extreme environmental impact.

 

Can multiple vehicles share a charger?
Physically, they can be used in turns. If multiple vehicles need to be charged at the same time, multiple devices can be deployed and the power sharing function can be enabled.

 

Hot Tags: tesla wall connector, China tesla wall connector manufacturers, suppliers, factory, connect tesla wall charger, tesla cable connector, tesla model 3 charging connector type, tesla wall connector generation 2, tesla wall connector nema 14 50 plug, tesla wall connector to nema 14 50